← Back to Services
ABPA Certified

ABPA Certified Backflow Prevention Assembly Testing

Irrivive is certified by the American Backflow Prevention Association (ABPA) to test, diagnose, and repair backflow prevention assemblies. That means your annual test is done to the recognized standard, your report is accepted by your water provider, and your drinking water stays protected — in Parker and across the Denver south metro.

Verify a Tester

What ABPA Certification Means

The ABPA Backflow Prevention Assembly Tester Certification confirms the tester has been trained, passed a written examination, and demonstrated — in a proctored field exam — the ability to test and diagnose every type of backflow assembly. ABPA's field test procedures follow the USC Foundation for Cross-Connection Control Manual of Cross-Connection Control, Tenth Edition.

For you, that's simple: one certified technician who can legally sign off your annual test, file the report, and fix the assembly if it fails — no second contractor, no scheduling shuffle.

What Is Backflow & Why It Matters

A backflow preventer is a mechanical valve that keeps contaminated water from flowing backward into your home's clean water supply. When pressure drops in the main water line — from a main break, heavy firefighting use, or peak demand — water can siphon backward, pulling fertilizer, pesticides, pool chemicals, or irrigation runoff into the drinking water supply.

The backflow assembly is the barrier that stops that reversal. Annual testing verifies the internal springs, seals, and check valves still seat tightly enough to hold the line under pressure. A worn spring or fouled seat can fail silently — which is exactly why Colorado water providers require a certified test every year.

Assemblies We Test

RPZReduced Pressure Zone Assembly

Highest hazard protection — required for most commercial and high-risk connections.

DCDADouble Check Detector Assembly

Fire-line protection with a bypass meter to detect leaks or theft.

PVBPressure Vacuum Breaker

Common residential irrigation protection against back-siphonage.

SVBSpill-Resistant Vacuum Breaker

A spill-proof alternative to the PVB for tight installs.

Fire Suppression Line Testing

Fire sprinkler and fire-line connections are a high-hazard cross-connection that water providers test annually just like irrigation. Irrivive's ABPA certification covers fire-line assemblies too — including Double Check Detector Assemblies (DCDA) and Reduced Pressure Detector Assemblies (RPDA) — so commercial and multi-family properties can satisfy both the fire marshal and the water utility with one certified visit.

  • Annual and post-repair testing of fire-line backflow assemblies
  • Detector-assembly bypass checks to catch hidden leaks or water theft
  • Repair quotes up front if an assembly fails the field test
  • Completed test report filed for your fire-line records and water provider

How Testing Works

01

Schedule Your Test

Book online or call. We confirm a window that works for you — most tests are done in a single visit.

02

Certified Field Test

Trent performs the ABPA field test procedure on each assembly and documents pass/fail results.

03

On-Spot Repair (If Needed)

If an assembly fails, we quote the repair up front and can often fix it the same visit.

04

Report & Filing

You get a completed test report for your water provider and your records — compliance handled.

When to Schedule Your Test

Annual Deadline

Most Colorado water providers require testing once per calendar year. Your provider sends a reminder — but don't wait for the notice to book.

After Any Repair

If your assembly is repaired, rebuilt, or relocated, it must be re-tested and certified before it goes back into service.

With Your Spring Start-Up

Schedule your backflow test alongside your spring irrigation start-up so both are handled in a single visit.

Before Winterization

A fall test confirms your assembly is sound before the off-season — and pairs naturally with your blowout appointment.

Why Annual Testing Matters in Colorado

Backflow assemblies are the barrier between your irrigation system and the public drinking-water supply. A worn spring, a fouled seat, or a cracked check valve can silently let contaminants siphon back in. Colorado water providers require annual testing to catch exactly that — and they'll suspend irrigation service if a test lapses.

As an ABPA-certified tester, Irrivive handles the test, the paperwork, and any repair in one visit — so you stay compliant and your water stays safe.

See our backflow repair service

Where We Test

Irrivive provides ABPA-certified backflow testing across the south Denver metro. If your water provider requires an annual test report, we'll handle the field test, the paperwork, and any repair — all from one local, owner-operated technician.

ParkerCastle RockCastle PinesHighlands RanchLone TreeLittletonCentennialAurora

Backflow Testing FAQ

What does ABPA certification mean?+

ABPA is the American Backflow Prevention Association. Their Backflow Prevention Assembly Tester certification verifies the tester has been trained, passed a written exam, and demonstrated the ability to test and diagnose backflow assemblies using the USC Manual of Cross-Connection Control field procedures. It's the credential water providers look for to accept a test report.

How often does my backflow preventer need testing?+

In most Colorado jurisdictions, backflow prevention assemblies must be tested annually, and after any repair or relocation. Your water provider sends a reminder; we help you stay ahead of the deadline so your water isn't flagged non-compliant.

Which assemblies can you test?+

We test Reduced Pressure Zone (RPZ), Double Check (DC/DCDA), Pressure Vacuum Breaker (PVB), and Spill-Resistant Vacuum Breaker (SVB) assemblies — both irrigation and domestic/fire-line connections.

What happens if my assembly fails the test?+

We document the failure, give you an upfront price for the repair, and can often complete the fix the same visit. After repair, the assembly is re-tested and we file the passing report with your water provider.

Do you test fire suppression / fire-line assemblies?+

Yes. Our ABPA certification covers fire-line backflow assemblies, including Double Check Detector Assemblies (DCDA) and Reduced Pressure Detector Assemblies (RPDA). We test and report on fire sprinkler connections so commercial and multi-family properties stay compliant with both the water utility and the fire marshal.

Can you verify your certification?+

Yes. ABPA maintains a public tester credential search at abpa.org. We're happy to provide our certificate number ahead of your appointment — just ask when you book.

Due for Your Annual Backflow Test?

Book an ABPA-certified test with Irrivive — owner-operated, upfront pricing, report filed for you.

720-734-6100

Ready to Transform Your Outdoor Property?

From sprinkler repair to decks, fences, patios, and holiday lighting — one call handles it all. Let's get your outdoor property built from the ground up.

Call Now
Call